化工行业产品
当前位置: 首页 > 惠州内衣专用胶

联系我们Contact Us

广东盛唐新材料技术有限公司

销售代表:13929035115

商务热线:400-168-3323

总机:0750-3466000

传真:0750-3466066

邮箱:gdshengtang@gdshengtang.cn

地址:广东省江门市江海区高新东路40号

惠州丝网印刷内衣硅橡胶

惠州丝网印刷内衣硅橡胶

  • 所属分类:惠州内衣专用胶
  • 浏览次数:
  • 二维码:
  • 发布时间:2023-02-21 14:10:19
  • 产品概述

丝网印刷内衣硅橡胶系列

产品特性及应用

 

本系列产品是适用于丝网印刷工艺施胶,液态胶水的粘度高,硬度适中,加温固化型液态硅橡胶,具有优异的耐气候老化等特性。可在-50~+200℃度长期使用,化学稳定性好环保无毒,固化稳定后可达到FDA食品级及检测认证。适用内衣布料粘合,在粘合加温固化后粘合布料稳固,收缩率低,强度高,韧性好的透明胶体。用在贴身内衣上环保安全。通过线条设计粘合在内衣上穿着舒适,塑出好身段。

 

Product characteristics and application:

This series product is suitable for screen printing craft glue, liquid glue viscosity is high, moderate hardness, heat type of liquid silicone rubber, excellent weathering resistance and other properties. Can be long-term use in -50 ~ + 200 degrees, the chemical stability is good environmental protection non-toxic, curing stability can be achieved after the FDA food grade and testing certification. Used underwear fabrics adhesion, solid bonding cloth after bonding heat curing, low shrinkage, high strength, toughness good transparent colloid. With environmental safety in lingerie. By line design bonding on the underwear, wear comfortable, creates a good figure.

 

 

使用方法

1、清洁:用胶前将使用设备与粘胶布料清理干净;

2、施胶:将A组份和B组份按11(重量比)的配比充分混合均匀。(建议使用设备混合,不用脱泡)混合不均匀会出现固化不完全或物理性能减弱。本品使用时允许的操作时间一环境温度有关,温度高,操作时间会减短。详细的操作时间参考产品型号说明。印刷施胶效果好坏与网版设计,胶水粘度,设备调试等因素密切相关。请在生产前做好必要测试;

3、本品易被分子中含P(磷)·S(硫)·NH3(氨)元素的化合物毒化而影响产品的固化,使胶体中的固化剂减少影响固化,用时须注意清洁,防止混入杂质。请在批量使用前做必要性测试。

 

Usage method cleaning:

1. Clean: with glue will use the equipment before and viscose fabrics clean;

2. Sizing: will a component and b components according to the ratio of 1:1 (weight ratio) of fully mixing. (it is recommended to use the equipment without deaeration) can appear uneven curing incomplete or physical properties. When using this product allows the operation time of the environment temperature, high temperature, operation time will be cut short. Detailed operating time reference product model specifications. Printing sizing effect is good or bad and the screen design, glue viscosity, equipment debugging and other factors are closely related. Please make necessary testing before production.

3. This product is easy to be molecules containing P(p), S (sulfur), NH3 (ammonia) element compounds poison and affect product curing, the curing agent in the gel can reduce affect curing, it must pay attention to clean, prevent the mixed with impurities. Please do need to test before batch use.

 

储运及注意事项

1、本产品应密封储存于干燥通风处(5~25℃),防止雨淋及日光曝晒;

2、在正常存储环境下储期查看相关产品型号说明;

3、产品开土封后应尽快用完,未用完产品需密封放于安全环境;

4、丝网印胶要注意用后清洗网版,未用完胶水清理好放进密封容器内放在-5℃的冰箱内保存12小时,下次解冻后使用;

5、本产品为非危险品,可按一般化学品储存运输。

 

Storage and transportation and matters needing attention:

1. This product should be sealed storage in a dry ventilated place (5 ~ 25), prevent the rain and sun exposure.

2. Under normal storage environment storage period to check the relevant product model specifications.

3. The product should be finished as soon as possible after open soil sealing, not finished products need to be sealed in a safe environment.

4. Silk screen printing glue must pay attention to the screen cleaning after using, glue not use up clean up into a sealed container in - 5 refrigerator for within 12 hours, the next time used after thawing.

5. This product is a non-dangerous goods, according to the general chemical storage transport.

 

包装规格

本产品AB分别采用20200公斤桶包装。

This product is packed in plastic drum: Glue A and B is 20kg/pc or 200kg/pc

 

存储期

5℃~25℃的阴凉干燥处储存,详细的储存期查看相关型号说明。

Storage period :5~25 in a cool and dry place to store,

the shelf life of detailed view the related models.

 

 

 

 


广东盛唐新材料技术有限公司

上一篇:哑光手感胶2023-02-21
下一篇:机器点胶内衣硅橡胶2023-02-21

近期浏览:

相关产品

相关新闻

销售代表:139-2903-5115 (微信同步)

  商务热线:400-168-3323

  总机:0750-3466000
  传真:0750-3466066

  邮箱:gdshengtang@gdshengtang.cn

  地址:广东省江门市江海区高新东路40号

聚氨酯密封胶

单组份聚氨酯密封胶